Pages

Wednesday, May 18

If I tell ya what I'm doing today, will you shut up and get out of my way

I woulda hoped to have things a little more tightened up before heading into the holy hell that is the last few weeks leading up to the Trans-Sylvania Epic.

Tools and parts are all over the place.  There's not one workable surface in my room.  I'm having second thoughts about writing off the 27.5+ on the rigid Vertigo Meatplow V.7.  Seriously.  Looking ahead to this weekend, whether/weather or not I'll be doing the Pisgah 111k or the 55.5k or neither or both.  Either which way, it will be wet.  Traction will be nonexistent.  Speed less of an important thing coming down the mountain than safety.  I have my concerns.  Even worse, I've got a very limited amount of time to get everything ready to go before heading to Pennsylvania.  Tearing down and rebuilding my bike (or bikes) on top of all that?  Meh.  The potential for worn-out pads, sticky pistons, shot bearings, possibly sticky drooper cable... might make for the first ever case of bike-related arson for insurance purposes.

Then there's the TSE itself (in regards to the 27.5+ topic).  It's a different beast than Pisgah.  Hard to explain it, but it just is.  The roots and rocks are not the same.  Where there are rocks, they are in piles.  The roots, less frequent.  Some of the trails really jam, boogie, twist and turn... traction would be nice here too.

But here's the thing.  I read this article over on Dirt Rag, and this tiny tidbit about the minuses of plus sized tires hit me:

" ...sidewalls can be susceptible to cuts."

Que?

I've had one sidewall cut within a month of riding 27.5+.  Maybe the second sidewall cut I've ever had since going tubeless back in... '01 or '02?  Who can remember?

I decide it was a fluke... the Vortex has plenty of exposed, sharp rocks.  Isolated incident.

Anyways, Chase joins me in jumping on the plusser bandwagon, but he can't get the Maxxis tires in his hands soon enough.   He settles on Schwobbles and ends up with a sidewall cut minutes into his first ride.  I write it off as well, because... Schwobbles.

So with my experience combined with Chase's and validated by the article on Dirt Rag, I have concern.  Being that I'm no longer an "industry" insider douchebag, I don't have direct channels, but I still have the FaceBook social media back door.  I asked Eric for some clarification.

"My own sample size isn't big enough to discuss the prevalence of sidewall cuts." ~ Eric

Which just confuses me more because why is it mentioned in the article?

Dunno.

So here I am, halfway between a tire/wheel swap wondering if I should take the time to remove the Tomahawk 2.3, replace it with a Rekon 2.8, swap wheels and cogs, figure out (again) how to reset my computer to the smaller diameter, move the wheel magnet over... I don't know what else.

Or leave all this shit alone, run what I know/brung, and wait until post-TSE June to do some more riding/evaluating.

But should I bother when an expert as already done this for me?

He never once tested the tires on a climb (I guess all their trails and gravel roads are downhill).  He used a full suspension bike, so does this even apply to someone riding a rigid single speed?    In the end, I just wished I had a cool accent.

I can't imagine taking two sets of wheels to a local trail, figuring out a good place to put STRAVA to good use, doing multiple runs and wheel swaps... and actually caring enough to do all that in the first place.

Oh well.  What to do?

Tic toc.  Tic toc.

Now, do I warm up my allergy excuse or keep my pounding sinuses in my back pocket?

7 comments:

Your Land Lord said...

Listen here better not be a drop of grease of my WOOD.....floors..or your out on the streets!

Anonymous said...

sht man, you change wheel sizes like my ex used to change her panties...
I still ride 26r, I like my 26r. I just bought another 26r for 150 bucks.. cause I love'm. I won't go 29r nor any other size. I'm comfortable with my 26r. They say size matters, not for me.... its just the joy of riding I have on my mind.

Hey, is that a vibrator in the corner of your shop?
friggen room looks like my whole house. Filled with bike stuff. But, i did manage to hide a lot of it in closet spaces. I'm a hidden closet biker now.

best to use an inner tube with tubless, just in case of that very instance you get a slash.

Anonymous said...

Just pull the friggin' trigger and ride with what you think will A. be the fastest B. most comfortable (cause you ride a torture device) and C. most reliable. Done Dickey.

Moe said...

Ride what you know. Sidewall cuts suck and often end your day.

sperho said...

The bigger the sidewall and the more its juicy convex arc presents itself to sharp things, the more cuts it should sustain. I have little interest in plus tires at the moment for this reason. However, I look forward to more data from you and others over the next few years to help solidify this point for me. ☺

Anonymous said...

I've put several hundred miles on my Krampus with Chupacabra 29x3 on Velocity Blunt 35 rims, tires are still fine, no sidewall cuts. This includes a trip through Highland MTB Park, several trips to Mt. Sunapee's downhill playground, and general dumbassery and bushwhacking around the rock strewn trails of New Hampshire. Also put a hundred or two miles on my new Stumpy 6Fattie out in the trails of Albuquerque and Durango, no issues there either. My only complaint with the plusser tires is their tendency to grab onto the sides of ditchy trails and pop me right up out of the trail. Sidewinder was sketchy as hell in a few sections for this reason.

Anonymous said...

BTW, the Stumpy 6Fattie is running Purgatory 27.5x3 front and rear.